VH857L - High Speed Vertical Milling Center (3-axis rail)

VH857L（Fanuc 5 packs+Direct coupled BT40 spindle）Technical parameters

Technical Parameters

Model	model	Unit)
itineraryTravel
X-axis travel	X-axis travel	mm	800
Y-axis travel	Y-axis travel	mm	500
Z-axis travel	Z-axis travel	mm	700
Distance from spindle end face to work table	Distance from guide plane to spindle center	mm	150-850
The distance from the spindle centerline to the column guideway		mm	555
workbenchWorktable
Table size	Worktable size (L×W)	mm	1000×500
Maximum load-bearing	Maximum load	kg	500
T-slot	T-slot	mm	5-18-100
spindleSpindle
Spindle speed	Spindle Speed	.rpm	12000
Spindle power	Spindle motor power	KW	7.5
Spindle taper hole	Spindle taper hole		BT40-φ140
Spindle spring chuck	Spindle collet chuck		C32
Loose knife way	Unlock tool way		Pressurized knife
Knife arm type tool magazineTool magazine
Tool magazine capacity	Tool magazine Capacity	T	24
Feed rateFederate
X/Y/Z express displacement	Ted X/Y/Z axis express displacement	mm/min	48000
Cutting feed rate	Cutting feed rate	mm/min	12000
precisionAccuracy
Positioning accuracy	Pointing accuracy	mm	±0.003/300
Repeatable positioning accuracy	Repeat ability accuracy	mm	±0.002/300
Machine informationMachine information
Machine tool dimensions	Machine dimension (L×W×H)	mm	235026002400
Machine weight	Machine weight	kg	4500
Power demand (power/current)	Power requirement	KVA	18

※As the company is constantly improving its products，Therefore, the company reserves the right to change the design and specifications and configuration at any time without notice，

If patronized，Please check if the specifications have changed!

VH857L（Fanuc 5 packs+Direct BT40 spindle)Optional configuration of the model (charged)

serial number	Accessory name	Product model	quantity	Remarks
1	̈Optional five-shaft (turboworm)	Body FAR210 motor + drive	1cover
2	̈ Optional five-shaft (harmonic gear)	Body J1200 motor + drive	1cover
3	̈ Optional four-axis (body)	Ontology AR210，Drive + motor	1cover
4	̈ Optional four-axis (body + disc tailstock)	Ontology AR210，Drive + motor，Disc tailstock RTA210，Block L，Bridge plate	1cover
5	̈ Optional four-axle (body + top tailstock)	Ontology AR210，Drive + motor，TJ210 top tailstock，Chuck flange	1cover
6	̈ Flat nose pliers should be optional	6inch	1piece
7	̈ An optional refractometer is required	Handheld 0-60	1piece
8	̈Precision cutting head is optional	BT40-C32-105(With card slot)	1piece
9	̈ Optional locking tool holder	BT40 with clamping lock tool holder	1piece
10	̈ Optional lock knife wrench	Dedicated to C32	1piece
11	̈ Precision spring clip is optional	C32 3/4/6/8/10/12/16	1 each
12	̈ To choose a U disk		1piece
13	̈ To choose a combination pressure plate	M16 Composite Platen	1cover